Fire Doors
Fire doors are essential safety features, designed to prevent the spread of flames and smoke, ensuring safe evacuation and protecting property in case of fire emergencies.
Fire Doors
These specialist doors are tested against the elements and purpose-built to withstand roaring fires for as long as possible. They enable buildings to compartmentalise and delay the spread of fire from one area to another.
Fire doors have a few vital safety features and really can be the difference between life and death. Two of the most important functions fire doors have are:
- When closed, they form a barrier to stop the spread of fire
- When opened, they provide a means of escape
- Because of their importance in protecting lives, it is imperative that fire doors receive regular inspections – frequency is likely to depend on many factors, including the age and condition of the door. Fire doors should always be fitted correctly by a competent installer, as they’re a carefully engineered fire safety device.
- Under the Regulatory Reform (Fire Safety) Order 2005 (FSO), landlords have a responsibility to ensure their properties and tenants are safe. The ‘responsible person’ has a legal responsibility under the FSO and can be criminally prosecuted if they do not fulfill their duties. The responsibility extends to the requirement for a fire risk assessment in all non-domestic buildings, including the common parts of flats or houses with multiple occupation.
Features of fire doors
- Here are some of the key features to look out for in terms of both domestic and commercial use:
- Fire doors are made up of various components. The door itself is usually made from a solid timber frame, but they can sometimes be covered again in fire-resistant glass. This glass should be able to withstand exposure to the heat condition in a fire test for at least 60 minutes before it reaches a temperature high enough to soften it.
- Around the edges of the door will be the intumescent seal, which is designed to expand when temperatures reach beyond 200°C to seal the gaps between the door and frame.
- For a private premises, it is advised to install fire doors where the risk is most imminent, for example the kitchen, or rooms which house lots of electrical devices. If your property is a new build, it should have been subject to regulations ensuring certain doors are fire doors – check this with the developer. As it currently stands, fire doors are only legally required in Houses in Multiple Occupation
- For commercial or non-domestic properties, liability lies with whoever is deemed the ‘responsible person’ for that property or the employer. For example, the owner of the property, or the person in control of the property for trade reasons would be responsible.
- Thorough risk assessments must be carried out and it is advisable to get professional help with all fire-safety-related regulations. There is more to passive fire protection and fire safety than just fire doors; escape routes, lighting, warning systems and equipment checks are also required.
- Many deaths during fires are not from direct contact with the flames, but the consumption of smoke. With this in mind, keep an eye out for a doorset with cold smoke seals. These should be within the intumescent seal. Exceptions may apply where the leakage of the smoke is essential for detecting a fire early.
FAQ about Fire Doors
A fire door is a specially constructed door designed to resist the spread of fire and smoke. It helps to compartmentalize a building, providing a safe exit route and reducing fire damage.
Fire doors are typically made from a combination of materials like timber, steel, or composite materials. They also include fire-resistant seals and intumescent strips that expand in heat to prevent smoke and fire from passing through.
Fire doors are rated based on the duration they can resist fire, such as FD30 (30 minutes) or FD60 (60 minutes). The rating indicates the minimum amount of time the door can maintain its integrity in a fire.
Fire doors are mandatory in certain areas, especially in commercial buildings, residential apartments, and public spaces. Regulations vary depending on the building type and purpose.
Certified fire doors often have a label or plate on the door or frame indicating their fire rating. They will also have specific hardware like self-closing hinges and intumescent seals.
Yes, fire doors should remain closed or have self-closing mechanisms. This ensures they provide maximum protection during a fire.
No, unauthorized modifications can compromise the fire resistance of the door. Always consult a certified professional for adjustments or repairs.
Regular inspections are crucial to ensure fire doors function properly. A professional should inspect them at least every six months or more frequently in high-traffic areas.
Propping open a fire door prevents it from providing its intended protection in case of a fire. Use approved automatic hold-open devices that close the door when fire alarms activate.
Yes, fire doors require fire-rated hardware, including hinges, latches, and self-closing devices. These components must be certified to withstand fire.